Male plugs
Male plugs
The bases for electrical connectors EN 175301-803 (before DIN 43650) with forms A, B, C (Industrial Standard), are meant to be mounted directly on hydraulic or pneumatic equipment, other industrial machines and the equipment for low voltage for subsequent joining of the respective connectors EN 175301-803.
The bases are with class of protection IP 65 (certified in accordance with IEC 60529), which provides reliable work in conditions of falling streams of gas or liquid and more dust, if they are correctly installed with sealing and screws, included in the set.
The square bases for electrical connectors DIN 43650 are for installation on flat surface.The base is connected to the device through two (four) installation screws with thread M3.
| Parameter | Description |
| Number of contacts | 2 or 3 Poles + Ground |
| Contact Spacing | 18 mm |
| locking screw | thread M3 |
| Protection class: | IP 65 |
| Rated voltage (connection type earthing contact) |
250 V (with solder connection) 300 V (when connecting screw) |
| Conductor cross-section (max.) | 1.0 mm2 |
| Set | Base + screws + flat gasket |
The rectangular bases for electrical connectors DIN 43650 are for installation on flat surface. The base is connected to the device through 1 screw connection with thread M4.
| Parameter | Description |
| Number of contacts | 2 Poles + Ground |
| Contact Spacing | 11 mm |
| Connection to the device | screw M4 threaded |
| locking screw | thread M3 |
| Protection class: | IP 65 |
| Rated voltage (connection type earthing contact) |
250 V (with solder connection) 300 V (when connecting screw) |
| Conductor cross-section (max.) | 1.0 mm2 |
| Set | Base + screws + flat gasket |
The round bases for electrical connectors DIN 43650 with forms A and C (EN175301-803). These bases install on different devices as electromagnets, motors with low voltage, sensors etc. The base is connected to the device through screw connection with thread M27x1,5.
| Parameter | Description |
| Number of contacts | 2 Poles + Ground |
| Contact Spacing | 18 mm |
| Connection to the device | threaded connection M27x1,5 |
| Protection class: | IP 65 |
| Rated voltage (connection type earthing contact) |
250 V (with solder connection) 300 V (when connecting screw) |
| Conductor cross-section (max.) | 1.0 mm2 |
| Set | Base + screws + flat gasket |